Generally speaking, the current glass doors are made of tempered glass, which is reliable in hardness, easy to clean, generous in style, transparent and light, and does not affect the illumination of light. Now many hotels, shopping malls, villas, etc. use glass doors. There are about two types of glass doors, one is transparent and the other is opaque. The transparent one is made of tempered glass, while the frosted glass is opaque or semi-transparent.
Installation steps of glass door handle
First, lay the glass door flat, make a mark on the place where the handle is to be installed in advance, and install the corresponding specifications of diamond bricks with water to make holes. At this time, attention must be paid to prevent the glass from breaking. If it is not tempered glass, use a 10mm glass drill bit to measure the hole distance of the handle [center to center, mark it on the glass, water and punch.
Then apply a little glass glue to the part where the handle is inserted into the glass. When the handle is assembled, the root is close to the glass and then the fixing screw is pressed to ensure that the handle is not loose.
Finally, when installing the handle, start from the outside, and screw the long screw of the handle inside. Do not leave the screw of the handle outside, so that the handle can be removed from the outside. When the handle connection part is inserted into the hole, it should not be too tight, and should be slightly loose; if the insertion is too loose, you can wrap the insertion part with soft tape.