What is a Floor Spring?
The floor spring is a hydraulic door closer, but the device that compresses the spring is a worm gear instead of a rack and pinion. Because the worm gear can rotate forward and reverse, the floor spring can be used for doors that open in both directions, while door closers can only be used for doors that open in one direction.
What to Consider When Buying Floor Springs?
The technical key of the floor spring is the bearing seat at the lower part of the main shaft. This bearing seat determines the bearing class of the floor spring. The floor spring used for the two-way door should bear the weight of the door body. Compared with the door closer, the weight of the door body plays a decisive role in the selection of the floor spring. The heavier the door body, the greater the opening force required.
In practical applications, the weight of the door generally does not exceed the maximum load-bearing capacity of the floor spring. However, at the same time, we also need to consider the two major factors of wind pressure and aspect ratio. If the door is installed outdoors, the wind pressure is one of the key factors that must be considered. In areas with strong wind, it is generally recommended to choose a floor spring with a larger door weight. This way, even if the wind is strong, you have enough force to close the door.
In addition, it is necessary to combine the aspect ratio of the door, that is, the ratio of the height and width of the door body. If it is not proportional, the door leaf will not work properly. Even if it can be used reluctantly, it will greatly reduce the service life of the floor spring and cause certain safety hazards to the use process.
Advantages of Floor Springs
1. Hidden installation, beautiful, practical and space saving.
2. The constant temperature device can ensure the stability of the door opening and closing speed.
3. High-performance devices provide maximum convenience for users.
4. It has the function of fireproof and smokeproof, and the safety is high.
|
