In daily life, what should I pay attention to when using the glass door floor spring? Draw a line and make a mark, so that the core of the glass door floor spring shaft coincides with the door clamp shaft; then, according to the installation manual and the actual object of the glass door floor spring, open the floor spring on the ground. The size of the hole should be tightly matched with the floor spring housing and cannot be loosened.
Secondly, in the daily installation, what should be paid attention to for the glass door floor spring? Put the glass door floor spring into the opened hole and straighten it. Lift the door leaf with the door clip installed, so that the shaft of the floor spring is inserted into the shaft hole of the door leaf; the fourth step: adjust the screws in the three directions of the floor spring of the glass door to keep the door leaf vertical and the axis of the up and down rotation coincide; To adjust the closing speed of the glass door, just cover the glass door floor spring decorative cover.
With glass clips: remove the stainless steel cover of the upper and lower glass clips on the door, open the door to a 90-degree positioning point of view, and use something to cushion the lower corner of the handle to open the door. Unscrew the screws that fix the shaft sleeve on the upper and lower door clips of the door with the 6-point key, and the door can be taken off by taking off the shaft sleeve. Also, everyone needs this aspect.
With the wider and wider application of glass doors, we can also see glass doors everywhere. When installing the glass door, the main thing is the installation of the glass door floor spring. Only by mastering this step of the floor spring of the glass door, can the beauty and service life of the glass door be guaranteed.